Manufacturer and suppliers of Induction melting furnace, Induction melting of copper, Induction furnace, Aluminum

melting furnace, Metal, Silver & Gold melting furnace, Ancillary equipments

INDUCTION MELTING FURNACES

Our Products

Articles

Magnalenz Induction Furnace

LINING REPAIR
During day to day furnace operation the lining is subjected to various kinds of thermal stresses, mechanical loading and metal-lining reactions. As a result some minor or major type of lining wear does take place. There are various methods to repair the lining depending on the size and nature of wear.
Cracking:
Often, small hair-like cracks are seen on the lining surface after it has been cooled to room temperature. This is natural and need not cause any problem. On cooling the lining refractory contracts, and when it cannot withstand the contraction – stresses, it develops small cracks and there by release the stresses.Tiny cracks o this nature close themselves on reheating of crucible during next melt. The only care needed is to ensure that in the initial heat after cold-start the charge should not contain fine metallic particles or borings which can enter the crack and prevent from self- closing.

Description Of Mf Installations

Melting Crucibles

Mf Solid State Power Converter

Ancillary Equipments

Control Circuits

Safety Margin In Power
Semiconductors

Safety And Protection System

Furnace Selection

Aluminum Melting

Induction Melting Of Brass

Induction Melting Of Copper

Induction Melting Of Steel

Very Small Capacity Induction

Melting Furnace

Press Report

Products Range

View Brochure

copyright2011©Magnalenzindia.com

Design & Developed by Cipherinfotech